Kent Oil Meters are accurate, reliable and economical way of obtaining all the information a user needs to control oil consumption in Generators, Boilers and to measure exact oil receipts.
Wherever oil is received, stored and used, Kent Oil Meters measure, totalise and records flows precisely. Kent oil meters can be installed in the pipeline and would totalise the flow of oil flowing through the line.
Regular testing of fuels and lubricants is essential to check the quality of products received from suppliers. Testing is also essential for condition monitoring of lubricating oils in use to protect equipment and extend oil change period. However , Laboratory testing on this scale is not feasible due to non-availabilty of facilities, high cost of testing and time delays in obtaining results.
S.S. Engineering Industries with their long years of experience, patents and registered design present on site Oil Analysis Kits and Gages. Now oils can be tested within minutes on the spot even by a layman. These gages have been certified for accuracy by renowned laboratories and have proven their utility and reliability with thousands of satisfied customers.
Oil Test Kits
»Lube Oilab: Complete analysis of new & used lubricating oils
»Visgage: To test viscosity of Lubricating Oils
»Hydrogage: To measure water content in Fuels and Oils
»F.O. Gage: To measure Furnace Oils/ LSHS Viscosity
Three in one system that lets you win the war against dirty diesel, costly down time and high oil consumption » Filters diesel upto 5 micron » Removes water from diesel » Monitors diesel consumption & receipts
Features
The OILCON's Diesel Filtration Cart removes solid particles, sludges and water from diesel. The filteration unit is equipped with its own motorised pump set with high suction head to draw oil from underground storage tanks.
Incorporates duel filteration cartridge for removing foreign particles as well as moisture from Diesel Fuel.
The dual filtration cartridge consists of a coalescer element and a separator element. The separator element is coated with a special chemical so as not to allow any moisture to pass through the system and can ensure removal of large volume of water anf make the clean diesel having less than .05% water or upto 20 ppm in multiples passes. Filtered diesel becomes free from particles above 5 micron.
Incorporates motorised pump set to deliver oil through the system.
Has a built in positive displacement flow totalizer for monitoring diesel receipts & consumption.
Portable Oil Filter Unit
Portable trolley for pumping & filteration of diesel, lubricating oils and chemicals
OILCON'S Portable Oil Filter Unit is for use at the point of application. It removes dirt and sediments from oil streams and makes oil clean. Several ratings of cartridges ranging from 1 micron are available to suit specific application. It is easy to use and maintain. OILCON'S Portable oil Filter Unit has rugged design suitable for toughest industrial application. Regular use with Diesel results in reduced maintenance of generators and engines and increased efficiency. When used with lubricating oils it increases oil service life as well as reduced requipment down-time and maintenance.
Features
Used for filtration of Diesel, Lubricating Oils & Chemicals
Depth type filters to remove dirt and particles upto 3 micron rating (1 - 10 micron optional)
Self priming motorised pump with starter
Pressure indicator for filter clogging
Centrifugal Lube Oil Filter Cart
Portable trolley for removing particulate contamination from used engine and hydraullic oils
Features
Unit is portable and can be easily moved near machinery requiring oil cleaning.
Uses off-line filtration process and cleans even when the machine is in operation.
Lube oils from New Barrels can be filled through the unit into machine reservoir.
All modern diesel engines, hydraulic systems and oil circulating systems fit full flow filters. These filters do not clean oil, but only stops large dust particles reaching the engine/lubrication parts. Small wear particles and contaminants still get through these filters.
Tests have proved that these small particles are equally damaging as they continue circulating-in and are not removed by conventional full flow folters. Abrasion due to contamination by such particles in the lube oil, is now the most significant cause of wear. Therefore, lube oil cleanliness is most vital cause and wear is directly related to lube oil cleanliness.
FLOWGAGE are revolutionary variable area Flowrate Indicators for installation in any plain and to operate at very high pressures, even with opaque liquids. Their simplicity, versatility and rebustness ensures accurate measurement of flow rate for all fluids & gases-including oil, water and air-and it is done quickly and efficiently.
Features
Works on opaque liquids.
Unbreakable as are in metallic construction.
Can be installed in any plane and direction (Unlike vertical for rotameters.
Accurate within +(-) 2% of FSD.
Electronic flow switch available optionally for control.
